Blitz the bath, basin and toilet:
Clean the bathtub and basin with a dirt removing, non-abrasive disinfectant cleaning agent and pay special attention to rings that may have formed. Make sure you clean the toilet with a disinfectant that removes bacteria. Let the liquid stand for a while, clean the bowl with a toilet brush and flush the toilet. “Keep away from abrasive cleaning products as these products will scratch basins, baths and toilets,” says Kate van Niekerk, marketing manager for Tile Africa. Soap-scale is caused by certain soaps that leave marks on the bathtub and washbasin. Remove soap-scale with a lemon-based dishwashing liquid.
Shower power:
Use a cleaning agent specially formulated for shower doors to remove water marks, scale build up and streaks. Use a disinfectant on the shower floor to remove bacteria.
Breath of fresh air:
Mildew is caused by damp and humid conditions. The best way to prevent mildew is to make sure that your bathroom is well ventilated with good airflow. Open windows after showering or taking a bath or install an extractor fan in the ceiling.
Extractor fans are extremely useful in bathrooms and prevent damp and humid conditions that lead to mould. Damp is especially rife in winter when it is cold and steam fills the bathroom, forming condensation on tiles, grouting and the ceiling. Extractor fans get rid of the steam and dampness and essentially prolong the lifespan of the paint on the bathroom walls and ceiling and prevent dampness that causes mould.
Regularly treat the ceiling with an anti-mould detergent and make sure the geyser has a drip tray and an overflow outlet. If mould appears use Mould Buster from Tile & Floor Care to clean and kill mould in areas such as the shower, on the ceiling and on tiles. Mould Buster is a specially formulated chemical and prevents the re-growth of mould.
Sparkling spa bath:
If you have a spa bath in your home, clean it by letting out all the water. Give the bath a good wipe with a non-abrasive cleaner. Most spa baths are self-cleaning, but it is good to clean them regularly. Remember the correct pH level is key to spa hygiene and therefore the pH level should be checked and adjusted on a regular basis. The ideal pH range is 7,2 to 7,6.
Change the water every 30 to 90 days and if you’re not using the bath for an extended period, it is advisable to drain it. “Make sure the cloth is soft and free from any hard particles that can scratch the high-gloss surface of the bath,” says van Niekerk. – Antonella Desi
Pictures courtesy of Tile Africa: www.tileafrica.co.za
Readers' Comments Have a comment about this article? Email us now.
Print
